TodayGovernmentJobs

AWTM Recruitment 2026: Apply Offline for 40 Posts

West Bengal · AWTM Vacancy 2026 - 40 Fitter, Machinist, Turner, and More PostsAWTM Vacancy 2026

Last updated on

Job Summary

BoardAWTM Vacancy 2026 - 40 Fitter, Machinist, Turner, and More PostsAWTM Vacancy 2026
StateWest Bengal
QualificationMatriculation + NTC/NAC from NCTVT in relevant trade
SalaryCPC Level-1 plus Dearness Allowance
Apply ModeOnline
Last Date02 Nov 2026
Apply on Official Website

Source & Verification

All details on this page come from the official recruitment notification published by AWTM Vacancy 2026 - 40 Fitter, Machinist, Turner, and More PostsAWTM Vacancy 2026 (advertisement no. ITI) — posted . You can check the original notification PDF here. Where a detail is not mentioned in that notification, it is clearly marked as not specified.

Introduction

The Academy of Weapon Technology & Management (AWTM), Ichapur, a unit of Advanced Weapons and Equipment India Limited (AWEIL) under the Ministry of Defence, Government of India, has announced a recruitment drive for 40 Technical Posts on a contractual basis. These positions are for deployment at Gun and Shell Factory, Kashipur. The recruitment aims to fill vacancies for trades including Electrical Fitter, Mechanical Fitter, Machinist, Turner, Electroplater, and Heat Treatment Operator. The contract period is initially for one year, extendable up to two years based on performance and company requirement. Candidates meeting the specified educational and age criteria are invited to apply offline. It is essential for all applicants to carefully read the official notification for complete details regarding eligibility, application procedure, and terms of service before submitting their application. The final authority on all recruitment-related matters rests with the official notification.

AWTM Recruitment 2026 Overview

Recruiting OrganisationAcademy of Weapon Technology & Management (AWTM), Ichapur (A Unit of AWEIL, Ministry of Defence)
Advertisement Number01/Hiring-GSF/AWTM/2026-27
Post NamesElectrical Fitter, Mechanical Fitter, Machinist, Turner, Electroplater, Heat Treatment Operator
Total Vacancies40 Posts
Application ModeOffline
Contract DurationInitially 01 year, extendable up to 02 years
LocationGun and Shell Factory, Kashipur, West Bengal
Official Websiteaweil.in

Important Dates

Application Start DateNot specified in the supplied notification
Last Date for Receipt of Application30 days from the date of publication of the advertisement in Employment News

Vacancy Details

Trade NameTotal Posts
Electrical Fitter04
Mechanical Fitter14
Machinist06
Turner07
Electroplater06
Heat Treatment Operator03
Total40

Educational Qualifications and Eligibility

To be eligible for these contractual positions, candidates must possess the following qualifications:

  • Matriculation
  • National Trade Certificate (NTC) / National Apprenticeship Certificate (NAC) issued by the National Council of Training in Vocational Trades (NCTVT).

The specific trade for which the NTC/NAC is held must be relevant to the post applied for.

Age Limit and Relaxation

The age limit for general candidates is between 18 to 35 years as of the last date for receipt of applications.

Age relaxations are applicable for specific categories as follows:

  • SC/ST: 05 years (only for posts reserved for SC/ST)
  • OBC (Non-Creamy Layer): 03 years (only for posts reserved for OBC)
  • Ex-Servicemen: Military service duration plus 03 years
  • PwD (PH): 10 years
  • SC/ST Persons with Disability: 13 years
  • OBC Persons with Disability: 15 years

Only the Class 10th Board Certificate/Marksheet will be accepted as proof of date of birth.

Application Fee

A non-refundable application fee of ₹100/- is required.

Candidates belonging to SC/ST, Ex-Servicemen, and Physically Handicapped categories are exempted from paying the application fee.

The fee must be paid through a Demand Draft in favour of "ORDNANCE FACTORIES INSTITUTE OF LEARNING, ISHAPORE" and payable at State Bank of India, Ishapore, Branch Code 01797 (IFSC - SBIN 0001797).

Salary and Pay Scale

Selected candidates will receive a consolidated monthly salary based on the existing CPC (Level-1) along with Dearness Allowance as per government rules.

The remuneration for 08 hours of work per day will be calculated at 1/30th of the basic pay plus Dearness Allowance of the relevant pay scale. Proportional deductions will be made for unauthorized leave or absence from duty.

Annual increments of 3% in basic pay are admissible based on satisfactory performance during the contract period.

Selection Process

The selection of candidates will be based on merit determined by their performance in the NCTVT (NCVT) Trade Test/Practical Test.

  • The cut-off percentage for calling candidates to the Trade Test will be decided by AWTM based on the total marks obtained in NCTVT.
  • The Trade Test will be conducted by AWTM.
  • A merit list will be prepared based on the combined marks from the NCTVT examination and the Trade Test/Practical Test, with a weightage of 80% for NCTVT and 20% for the Trade Test/Practical.
  • Candidates qualifying in both NCTVT and the Trade Test will be called for document verification in order of merit.
  • The number of candidates called for document verification will be limited to the number of notified posts per discipline/category.
  • If candidates are rejected during document verification due to non-availability of required documents or not meeting advertised criteria, additional candidates will be called from the merit list.
  • The ratio of vacancies to eligible candidates called for interview (document verification) will be 1:10.

Application Procedure

Interested and eligible candidates must follow these steps to apply:

  1. Download the application form from the official website.
  2. Print the application form and fill it out carefully in Block Letters only.
  3. Read all terms and conditions thoroughly.
  4. Prepare a Demand Draft for the application fee (if applicable).
  5. Attach all required self-attested documents and two recent self-signed photographs (signed on the back) with the application form.
  6. Send the complete application by post to: THE CHIEF GENERAL MANAGER, ACADEMY OF WEAPON TECHNOLOGY & MANAGEMENT, ICHAPUR P.O.- Ichapur, Nawabganj, Dist. - 24 Parganas(N) PIN-743144.
  7. The envelope must be clearly superscribed: "APPLICATION FOR THE POST OF 'Trades Name' ON CONTRACT BASIS".

Candidates are advised to regularly check the website for any updates or corrigenda.

Required Documents

Candidates are required to submit the following along with their application:

  • Self-attested copies of educational qualification certificates for age proof.
  • Other necessary enclosures as specified in the notification.
  • Two additional self-attested photographs (signed on the back).

Important Instructions and Common Mistakes

  • Ensure that the application form is filled in Block Letters only.
  • Verify that all required documents are attached and self-attested.
  • Double-check the Demand Draft details (name, payable at, branch code, IFSC) to ensure accuracy.
  • The envelope must be superscribed correctly as per the instructions.
  • Applications received after the last date will be summarily rejected.
  • Candidates claiming reservation benefits must submit valid certificates issued by the competent authority at the time of application.
  • For OBC category applicants, a duly signed Undertaking in the format provided in Appendix-1 of the application form must be submitted.
  • AWTM management will not be responsible for any postal delays.
  • Any dispute related to this recruitment will be subject to the jurisdiction of courts/tribunals located in Kolkata.

Official Notification and Application Links

For detailed information and to download the application form, please refer to the official sources:

Relevant FAQs

Q1: What is the last date to apply for the AWTM recruitment?
A1: The last date to apply is 30 days from the date of publication of the advertisement in Employment News.

Q2: Is there any application fee for SC/ST candidates?
A2: No, SC/ST, Ex-Servicemen, and Physically Handicapped candidates are exempted from the application fee.

Q3: What is the selection process?
A3: Selection is based on merit from the NCTVT exam (80% weightage) and Trade Test/Practical Test (20% weightage), followed by document verification.

Q4: How will candidates be informed about the Trade Test?
A4: Admit Cards/Call Letters will be sent to candidates via post/email.

Download Notification PDF View full job details →
Note: Verify all details from the official notification before applying.